Rear Brake Drum Shoe Spring & Cylinder Kit (6Pc) For Chevrolet Cobalt Pontiac G5

Transit Auto Rear Brake Drum Shoes Spring And Cylinders Kit (6Pc) K8N-100709. This product only fits the following vehicles. Chevrolet Cobalt Base/LT Team Canada/LT/LS AND With 5 Lug Wheels. Chevrolet Cobalt LT/LS AND With 5 Lug Wheels. Chevrolet HHR LT Panel/LS Panel/LT/LS and with Drum rear brakes.

Pontiac G5 With 5 Lug Wheels. Your vehicle is not listed? Search in our store by entering your vehicle year make model and the position you are searching for in the form below. 2 x Rear Brake Drum (Both Sides). 1 x Rear Left Drum Brake Wheel Cylinder (Driver Side). 1 x Rear Right Drum Brake Wheel Cylinder (Passenger Side). 1 x Rear Drum Brake Hardware Kit. 1 x Rear Drum Brake Shoe Set. Brake Shoes / CMX Ceramic Pads / Spring Kit (K8N-100396). (One for left side and one for right side). Engineered with carbon-enhanced XCastT (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance. 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed.

Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions. Thermal Stability Profiling (TSP) tested for maximum tolerance to voluminous amount of constant thermal cycles. CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy.

Thickness and Metallurgy electronically validated for manufacturing consistency. Manufactured with dedicated Vertical Turning Centers (VTC) and balancing machine to eliminate vibrations. Best matched with CMX brake shoes. Covered with Corrosion Inhibiting Oil (CIO) for transport and storage.

Must be cleaned with disc brake cleaner to remove oil before installation. Part Reference Numbers : AD90695 CD90695 PD90695 80131 YH480534C YH480534 122.62039 123.62039 BD920142 85173 4406692 920142 Q80131 9808 BD180302. Interchanges: AD90695, CD90695, PD90695, 80131, YH480534C, YH480534, 122.62039, 123.62039, BD920142, 85173, 4406692, 920142, Q80131, 9808, BD180302. Exclusive G3000 heat-flowed castings iron and aluminum give our wheel cylinders the ideal balance between tensile and hardness.

Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality. Pressure tested to ensure safe and confident braking. Trivalent coated bleeder screws provide extra protection and added durability.

Made with high quality EPDM rubber cups and boots for long lasting performance. Wheel cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups. Due to repair time and cost, it is more desirable to replace instead of repair wheel cylinders.

Recommended replacement is suggested when servicing drum brake. Part Reference Numbers : 34294 WC258110 W610148 WC370198 WC131446.

Interchanges: 34294, WC258110, W610148, WC370198, WC131446, 34295, WC258180, W610149, WC370199, WC131445. TQ OE-matched material gives our spring kit the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation. Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products. Maintains proper movement for safe, effective stopping performance.

Provides longer brake life and performance. Part Reference Numbers : 7410K H7326 HW7410 H7243. Interchanges: 7410K, H7326, HW7410, H7243. TQ OE-matched friction material gives our brake shoe the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation. Precision ground maximizes friction-to-drum contact.

Attached levers & pins included to match OE (on specific applications). Follows original manufacturers' designs for dispersing heat, helping to prolong drum life while reducing noise and vibration. Quality validated for proper metallurgy and correct brake shoe thickness. Part Reference Numbers : 800 NB800 800B. If you wish further validation, simply copy and paste your vehicle information along with your VIN into the order note. We will double-check it before sending your order. We assume all responsibility for the fitment information of our products.

We follow the guidelines set out by Friction Material Standards Institute (FMSI) to ensure the safety of our customers. This means that if the FMSI says a pad number should have no slot or should not be chamfered based on it's size, we will follow their guidelines. Our customer's safety is our highest priority.

All our products follow the OE specifications: there is no modification needed for installation. Do you need any additional information about my vehicle? If you see your vehicle in the fitment list, you don't need to send us additional information, the parts will fit your vehicle, we guarantee it. If you are not sure and would like to double check, send us a message with your vehicle information or VIN and our vehicle specialists will assist you.

The picture does not match my parts. The picture in our listing are the actual image of the specified application, unless specified to be a generic image.